4 Creative Ways To Hang A Curtain Rod Without Brackets

Hanging curtains is most likely one of the tortures in a level of hell. The measurements, the leveling, the drilling, and the mounting all take up time and effort at awkward angles and heights. The worst part about hanging a curtain rod is that the brackets will leave holes in the wall.

How do you hang a curtain rod without brackets? There are several ways to hang a curtain rod without brackets. The easiest ways to hang a curtain rod without brackets is to use command hooks, coat hooks, Kwik-Hang curtain-rod brackets, or tension rod curtains. 

If you want to find the best Curtain Rods, click here.

After researching ways to protect your walls and still get curtain rods up, we have put this list of creative ways to hang curtain rods without brackets, drills, spackling, or holes in the wall. 

Why Don’t You Want To Use Brackets To Hang Curtain Rods? 

Even though the standard way to hang curtain rods is by drilling and screwing brackets into the wall, the usual method is messy. The headache of mounting, measuring, and hanging curtain rods is real. Although the standard way is pretty universally accepted, it isn’t the only way. Here are the top reasons why you shouldn’t use brackets to hang a curtain rod. 

#1 Reason: Holes In The Drywall

First of all, you have to put holes in the wall, which will always be there in the drywall and will probably still be visible even if you sand and spackle them closed. It doesn’t matter if you drill them correctly the first time and hang the curtain perfectly and leave it alone until you replace the brackets or move out. The second you remove the brackets and curtain rod; the holes in the drywall will be visible and will always look horrible from across the room. Avoid the ugliness. 

#2 Reason: Measuring Is Maddening

Other methods of putting up curtain rods without brackets do not require measuring because you are relying on the measurements already built into the window frame. However, if you use the old-fashioned standard way of hanging a curtain rod, you must make several measurements on a ladder. 

If the measurements are even a fraction of an inch off, you will be able to notice every day. If it is more than a half-inch off, anyone who enters your home will be able to tell. Missing the measurement is a terrible pain that will cost you a lot of unnecessary time that you just don’t want to spend on your windows or curtains. 

Reason #3: They Are Unnecessary

The main reason you don’t want to use brackets to hang a curtain rod is that other non-damaging options look just as good. Some of these alternatives look even better than standard bracketed curtain hanging. 

Method #1: Command Hooks

Command hooks are the legendary and diverse tool for hanging pretty much anything. There are many blogs and DIY websites that detail the uses of command hooks for hanging things like keys, photography, and artwork, and even internet routers mounted to the wall. One of the most creative methods of command hooks is using them to fit and hang curtain rods. The steps below will help you to purchase the right type of command hooks, install and use them as curtain rod mounting. 

Step #1: How Many Command Hooks Should You Use? 

You should only need two command hooks if you are hanging a curtain rod that is 30 inches or less in length. For curtain rods that are longer, you will need a third command hook in the middle of the curtain rod to support it. 

Step #2: Which Type Of Command Hook Should You Use? 

The Classic Indoor Command Hook can hold about 5 pounds easily, which is more than enough for most curtain rods and curtains. The Jumbo Command Hook holds up to 7.5 pounds and should be used for more massive curtain rods with more weight. There are also different types of Command hook metals that come in brushed nickel or oil rubbed bronze. The sizes of command hooks are small, medium, and large, with large being the best option for hanging and fitting a curtain rod. 

Step #3: Choose An Appropriately Sized Curtain Rod

You need to choose a relatively light and narrow curtain rod to use a Command Hook as a way to hang the curtain rod. The curtain rod should be thin; 3/4 of an inch or less in diameter. This is because 3/4 of an inch is about the most a command hook can hold. Any larger and the curtain rod will not fit securely into the hook. 

Step #4: Use The Adhesive To Attach The Command Hook To The Wall

Measure the curtain distance from end to end and the height that you want the curtain rod to be positioned at. Using a pencil, mark the place for each of the Command Hooks. Peel off the cover for the adhesive and then press the Command Hook into the wall on the pencil mark. You want to press hard for at least thirty seconds as the glue does its magic. Repeat this step for each Command Hook that you are using. Leave your Command Hooks on the wall before placing the curtain rod on them for at least thirty minutes. 

Step #5: Replace After A While

Since Command Hooks use adhesive stickers on the back of them to hold onto the wall, they are not a great long-term choice for hanging curtains. On average, you will need to replace Command Hooks holding your curtain rods almost every year or two. 

Method #2: Kwik-Hang Curtain Rod Brackets

On the opposite side of the bracketless curtain, hanging methods is the Kwik-Hang curtain rod brackets. Even though they are called brackets, they do not require drilling holes into the wall or mounting the brackets with screws. 

Instead, the Kwik-Hang is specially designed to use the frame of a window to install and hold a curtain rod. However, if you do not have a window frame, this is not an option that will work for you. The best part about this method is that these brackets can hold up to twenty pounds of weight, which is much more than any of the other methods. 

Step #1: Position The Kwik-Hang Brackets 

Kwik-Hang Brackets for curtain rods do not require any measuring. Instead, simply position them at the top corners of the window frame where you want to install curtains. 

Step #2: Tap The Brackets Into Place

Once you have positioned the Kwik-Hang brackets into place at the top corners of the window frame, use a rubber mallet to tap the brackets. The little clawed edges that look like small nails should fit between the wall and the wood of the window frame. The wood of the frame does get holes in it. 

This is delicate work, and the challenge with the tap in brackets is that they tend to wedge the window frame from the wall. This happens more and more over time and can damage wooden window frames if the curtain and curtain rod are too heavy. 

Step #3: Hang The Curtain

After you tap the brackets into place above the window frame, the curtain rod can be placed over them. That’s it. You are done! The quickness of the Kwik-Hang brackets is a big selling point for their product. However, the holes that the tiny claw-like nails create in the window frame can be damaging. 

Method #3: Coat Hooks

Coat hooks can be more comfortable than traditional curtain rod brackets in some ways and more difficult in others. Sure, you do not have to do any drilling when installing coat hooks, which is a big plus. However, you have to make exact measurements and use many of them to pull off hanging up curtains with coat hooks. You are also not hanging a curtain rod. 

Additionally, it may be challenging to pull the curtains back. You have to move the curtain one coat hook at a time, so you may only want to try this method on artistic spaces or spaces that are not generally used to open and close a lot. 

Step #1: Choose The Coat Hooks

Since there are so many different types, the sky’s the limit on style for your coat hooks to be used as curtain hooks. Make sure that the hooks are small enough for the curtain hanging holes to fit through and that the hooks will hold the curtain securely. 

Step #2: Measure Equal Distance Apart

This is the most challenging step on this or any of the other methods. Measuring so many different hooks is time-consuming and needs to be done all at once to ensure accuracy. Because you need so many coat hooks to hang up your curtain, you need to make exact measurements for distance apart and height for each one. Some curtains may require up to a dozen or more coat hooks, and that will take a lot of time!

Step #3: Place The Curtain

Once all the coat hooks are in place, you can meticulously hang up the curtain. The curtain can only be pulled back one coat hook at a time. Use this method for a decorative curtain or window or as a partition curtain through a door than usable curtains in a window that you would need to adjust often. 

Method #4: Tension Rods

Tension rods are great for a quick curtain hanging. They are poles that extend using a spring from the inside and can be loosened and then tightened again to virtually any length. They are a wonderfully different way to hang curtains and very quick to install without measurements or holes in the wall. 

The only problem with tension rods is that the spring within them can give out. This is especially true for the tension rods with a smaller diameter and, thus, a smaller and weaker spring within them. 

Step #1: Choosing The Tension Rod And Curtain

A tension rod comes in various diameters. You need to make sure that the curtain you have has a pocket that the tension rod can slide through from end to end to hold it up. Also, the diameter of the tension rod needs to be able to fit into this pocket without forcing it through. 

Keep in mind that tension rods also have a rubber end that protects it as it is wedged into the space where it will remain. This means that the diameter of the rod is different than the width needed for the curtain to fit over the rubber ends. The curtain pocket where it hangs from the rod must be large enough to accommodate the rubber ends of the tension rod. 

Step #2: Attach The Curtain To The Tension Rod

With the diameter of the pocket and tension rod sorted out, you can slide the curtain into the pocket. You want the tension rod to go all the way through the pocket of the curtain and come out on the other side. Make sure you can see each end of the tension rod for the next step. 

Step #3: Position The Tension Rod In the Window Or Doorway

A tension rod works by fitting into a space between two walls. Tension rods can also be used in the frame of a door or the framework of a window. Then you can rotate the whole rod to make it longer by extending the spring within the tension rod. As you turn the rod and it becomes longer, the tension rod gets wedged in between the frame of the two walls. Once the tension rod is secured in place, it should be snug and not able to be moved. 

Step #4: Spread Out The Curtain

Once the tension rod has been extended into place, you can spread the curtain over the rod to cover it completely. You may not be able to get the curtain up and over the rubber fittings on the ends of the tension rod, but if you can, you will have a seamless curtain in your window or door frame. When the curtain is spread out properly, there should be little bunching, and the curtain should be evenly distributed over the rod. 

How Do You Choose The Correct Curtain, Rod, and Mounting Measurements? 

According to interior decorators and design companies like Overstock, there are appropriate lengths and arrangements of curtains that need to be followed for the best flow and function of your curtains. The way that you mount your curtains, the length of the curtain rod, and ultimately the length of the curtains all depend on the look you are going for and the space of the window you are creating coverings for. 

What Are Curtain Mounting Techniques? 

All of the methods that we showed you in this article are great for bracketless curtain rod hanging. However, each of these methods can be oriented in different ways. For instance, the two main orientations of bracket mounts are outside the window frame or right on the window frame edge. The other less common style is to mount inside the window frame. All of the tips and tricks for installing and measuring curtains and curtain rods come from the sources of Overstock.com.

Mounting Curtains Outside The Window Frame

Mounting a curtain rod outside the window frame is the most common orientation of curtain rod brackets. In this orientation, the curtain rod is secured to the drywall on the outside length of the window frame so that there is an overhang of the curtain and the window. When curtains are hung on the outside of the window frame, they block the most light and give a complete and seamless look to the window overall. 

Mounting Curtains Inside The Window Frame

Mounting a curtain rod inside the window frame is far less common. You do not get the full coverage of the window and will undoubtedly notice that some natural light will enter the room. The orientation of inside curtain mounting is where the brackets that hold the curtain rod are mounted on the inside of the edge of the window frame. 

This is a look that allows the sleek window frame to be in full view and is angular for a style that is unique and wanted by some designers. Consult a design specialist before attempting this orientation of the curtain rod because the look can be off-putting in the wrong sized windows. 

How Long Of A Curtain Rod Do You Need?  

Curtain rod length is something that you need to consider and plan for with measurements and a vision of what the whole window space will look like when you are done. The most standard measure of the curtain rod is 3-6 inches beyond the edge of the window frame on the outside (https://www.overstock.com/guides/how-to-measure-for-curtains). However, you can always install curtain rods above or inside the structure of the window, so the aesthetic of the length of the curtain rod is all that matters. 

Method #1: Curtain Rods Inside The Window Trim

A shorter curtain rod that has a length short enough to fit inside the trim of the window creates a streamlined appearance with the lines of the window frame being visible. If you are going inside the trim route, make sure to get easily extendable rods. Also, you may want curtain rods with protective ends because of the change of scuffing them on the window frame. The width of the curtain rod should either be exactly even with the window frame or only slightly more full for a put-together and clean look. 

Method #2: Curtain Rods Installed Below The Window Trim

If you have windows with casted molding or beautiful and intricate designs, you probably will not want to cover them up. In this case, place a curtain rod just below the trim. The length of the curtain rod for this type of below trim mount should be at least 3 to 5 inches beyond the window frame on each side and up to six inches for a fuller look. 

Method #3: Curtain Rod Installed Above The Window Trim

Probably the most used and best way to mount the curtain rod is up and over the window the frame. This lengthens the windows and makes the room look larger or taller, and the windows grander. The length of your curtain rod is determined by preference. The higher and broader you mount your curtain rod, the larger the window will seem. So you can make use of a very long curtain rod for over the window trim mountings. 

How Long Of A Curtain Should You Use? 

Curtain length is all about the design and flow of the interior you want for your home. The three main ways to hang your curtains depending on the style you are looking for and the functionality of the curtains concerning the window size. The three different lengths of curtains are mounted above the window sill, mounted below the ledge, and mounted so that they sit at floor level. 

Choice #1: Curtain Length Above The Window Sill

If you have a large window sill that will be awkward and bulging with a curtain in front of it, or an ornate window trim and sill design that you do not want to hide, you can hang a curtain length that is above the window sill. You still want the curtain to block out light and maintain privacy, so choose and mount a curtain so that it hangs only 1 centimeter or so above the window sill. 

Choice #2: Curtain Length Below The Window Sill

The most typical length for a curtain is for it to cover the window sill and sit well below it. The length of the curtain should sit about fifteen to twenty centimeters below the window sill. This look is elegant and flows nicely with the design of most interiors because the floor is still clearly visible. At the same time, the window sill is framed with the fullness of a long curtain.  

Choice #3: Curtain Length Floor Level 

If you are mounting a curtain and choosing a length that will go all the way to the floor, it depends on the style you are looking for. Some want the small bunch of material at the ground. Some want it to be barely touched. The most common floor level curtain length is to allow about one centimeter of space between the floor and the hanging curtain. 

How Do You Measure A Space For Curtains

There are two different measurements to consider when measuring the space of the window or door that the curtain will be covering. You want to take into consideration the width of the area and the length of space. This should be done to the outside edge of the frame of the door or window. 

Measuring The Space For Curtains By Length

The length of your curtains is a preference unless you are looking for an above the window sill look, which should be measured explicitly so that it is very close to touching the window sill. This is to ensure that the curtain still blocks out light and maintains privacy. A general measurement for longer and larger looking windows with curtains is about twenty inches above the window frame. This creates grand and long appearances that can even make the room look larger. 

Measuring The Space For Curtains By Width

When measuring curtains for width, you want the curtains to be able to cover the entire window. After that measurement is met, the choice for fuller or shorter widths is up to you. Keep in mind that a fuller width will give the curtains and window a more extravagant feeling of warmth. 

On the other hand, a shorter width will provide a streamline tailored look to the window. Ultimately, the width of the curtains should be at least one and a half to 3 times the width of the window from the outer edge of the window frame to the other outer edge of the window frame. 

Final Thoughts

To hang a curtain rod without holes or brackets is very difficult. There are only a few creative options to consider, and none of them can hold much weight over 7 pounds. However, the possibilities are available. Some of them can save you time by eliminating the need to measure distances and heights because you are merely using the dimensions of the window frame itself to mount the curtain rod. 

And some do not puncture the drywall or wood of the window frame at all and instead depend on adhesive to hold the hooks in place that will be supporting the curtain rod. All in all, hanging curtains is a pain, and any method that alleviates some of that aggravation is a plus. Take these tips and techniques into consideration and take a deep breath before you start your DIY curtain hanging project.

Recent Posts