There comes a time when you need to repair all the small holes in your walls that were made from hanging shelves, pictures, posters, or anything else that needs to have decent support to hang on the wall. You could either be moving to a new home or you just want to change up the decor in the current house.
There are a few ways that you can go about fixing these holes. Many experts want you to buy 7-8 items and says it will take 1-2 days to be able to fix these minuscule holes. Fixing small holes in your drywall can be done in 5 easy steps and can be done in under 1 hour:
- Push and poke holes to ensure that are flat
- Fill holes with 3M SHR-16-BB Patch Plus Primer Lightweight Spackling
- Wait for spackling to dry
- Sand holes to make a nice smooth surface
- Paint over if desired
If you want to find the best Drywall Repair Kit, click here.
Below I am going to go into detail and show you a fast and easy easy way to fix these holes where you only need 3 items and 1-2 hours of time. This is the fastest, cheapest, and easiest way to fix those annoying little holes in the wall.
Supplies Needed
Before you start trying to fix the small holes in your walls be sure to pick up the supplies in the list so you are prepared to get the job done quick and effectively.
- Mud and/or Scraper Knife
- Sand Paper
- 3M SHR-16-BB Patch Plus Primer Lightweight
- Paint
- Paint Brush
1. Push and Poke Holes
The very first step is to push and poke around the holes in the wall to ensure they are nice and flat. Sometimes the holes can become rigid and have pieces of drywall poking out.
You can use either your fingers or the butt of a mud or scraper knife to push against the part of the wall that needs to be flatten.
2. Fill Holes with 3M SHR-16-BB Patch Plus Primer Lightweight Spackling
After we have made ensured that the walls and holes are nice and flat we are going to fill the holes with 3M SHR-16-BB Patch Plus Primer Lightweight Spackling. This stuff does wonders for small holes. It dries fast and hard, and even has primer already in the formula so its easy to paint over. This means you will save money because you dont need to also buy primer.
Make sure the holes are nice and full of the spackling. Take a mud knife and swipe over the holes to make sure they are full and even with the wall.
3. Wait for Spackling to Dry
This is the easiest part of the job and also one of the greatest things about 3M SHR-16-BB Patch Plus Primer Lightweight Spackling. This stuff takes no time to dry compared to other products on the market.
Other products you need to wait a full day to dry. We only need to wait 30 minutes for this to dry and then we can move onto the next steps of the process.
4. Sand Holes
After everything is nice and dry we need to sand the holes. Take the time and use sandpaper to sand over the holes to make sure everything is a smooth and even surface. This is important so when we paint over the hole we cant see where we previously had holes in the walls.
5. Paint
This step is only necessary if you want to paint. The hole is repaired, looks great and is ready to be painted over.
Conclusion
This is by far the easiest, fastest, and cheapest way to fix the pesky little holes in your walls. It only takes 5 easy steps and the tools necessary can cost under $25 total.
Related Questions
How big of a hole can you patch in drywall? Anything bigger than 6-8 inches is different than repairing a small hole. This will require drywall and not just patches, tape, or spackling.
How to fix screw holes in drywall? Use the process above for this, it works just as good!
How to fix nail holes in drywall? Same thing! The steps above will do wonders and be easy peasy.
