How to Remove Liquid Nail


Liquid nails are loved for their strong mechanism of attaching mediums adhesively. The problem comes when the need for removing the liquid nails arises. The nails can be quite difficult to remove, but with the right procedures, knowledge and tools, the task becomes a piece of cake.

How do you remove liquid nail? Removing liquid nail requires you to identify the type of liquid nail, what the material is that the nail is attached to and then following the right removal process.

  • Removing from skin – if latex based soap and water, if solvent based use oil or petroleum jelly and water.
  • Removing from concrete – use a chisel and a hammer.
  • Removing from plastic – heat the nail with a blow dryer to loosen and remove.

Below are a few ways that will show you how to effectively remove liquid nails around your home on your home improvement projects.

If you want to find the best Liquid Nail, click here.

What are liquid nails and what are they used for?

Liquid nails are known for being stronger than the normal nails. Their capability to join materials such as cupboards or wood together adhesively is amazing. Liquid nails come with a caulk gun which is used to spread them in a zigzag manner on two materials that need to be attached. The nails will then require 15 minutes or so to dry up enough for use. The nails are used to attach materials such as glass, plastic, rubber, concrete, MDF, wood, metal and ceramics. Liquid Nails are typically used in conjunction with nails or screws to create a solid foundation with multiple ways of keeping the materials together without being able to move, break, or budge in anyway.

Liquid nails are efficient, but there will come a time when you will need to remove them. There are many reasons for needing to remove these liquid nails around the home. Regardless of the reason, you will need to know the type of liquid nail used and the material attached for efficient removal. The following ways will work for removing liquid nails from different materials:

How to Remove Liquid Nail from Skin

There are two distinct types of liquid nails and they have slightly different instructions on how to remove from your skin.

Latex-Based Liquid Nails

Luckily, these are easy to remove if they get stuck on your skin. You only need soap and some water to get the job done. Wash the part of the skin with the liquid nail carefully, then apply some soap using a piece of cloth. Do this gently until you get rid of the liquid nail. Before you know it, the liquid nail and material will be unattached.

Solvent Based Liquid Nails

This one is also easy to remove, but instead of soap, you will need oil or some petroleum jelly. Water and oil do not mix, so you will not need any water to remove solvent-based adhesive from materials or skin. To remove the liquid nails, apply the oil gently and repeat the process until you remove it. You can also use other liquid similar to oil to get rid of solvent based liquid nail.

How to Remove Liquid Nail from Concrete

In order to separate material that has been attached to concrete, you will need a chisel and a hammer. This method involves dust and burns a lot of calories, so be ready to roll up your sleeves and prepare to use some protective gear. To attain the best results place your chisel at the right angle and give it a continuous tap. This will work better than knocking it continuously since it might scoop out chunks of concrete. Remember to wear your gloves and goggles for protection during the task for safety purposes.

Separating Attached Materials

This process is not easy, but it produces excellent results. You will require a piece of wire that you can hold comfortably with both of your hands. Find some handles to attach to the end of the wires to help make the task easier. If you do not have quick access to handles you can replace them with a pair of gloves. In order to separate the two intended materials please follow the steps below.

  1. Start by fitting the cutting wire in between the two materials to be separated.
  2. Hold the wire at both ends with your hands if you are wearing gloves, but if you have connected the handles hold them with both hands.
  3. Formulate a motion for working the wire in the middle of the materials. This will be difficult but very interesting at the same time.
  4. Start at one corner and saw smoothly back and forth throughout the joining point of the two mediums.

How to Remove Liquid Nail from Plastic

You can remove liquid nails from plastic by softening the caulk or adhesive through heating. To heat the adhesive you can use a blow dryer or an electric gun. You then give it some time to cool before scraping it off. You can use a flat edge or a putty knife to scrape off the liquid nails.

How to Apply Liquid Nail

Watch this video to see the proper way to apply liquid nail to any surface:

Final Thoughts

The steps you take in removing liquid nails depends on what the liquid nail is attached to. By utilizing the directions above you will see positive results and have no worries about removing liquid nails from anything!

Related Questions

  1. How long does it take liquid nail to harden? It can take up to 7 days for liquid nail to harden. Ultimately it depends on the product that is being used. Some take as short as 30 minutes.
  2. Can you paint over liquid nail? Painting over liquid nail is not recommended, you should use caulking in this case.
  3. Can you drill into liquid nail? Liquid nail is easy to drill into as long as you have the proper tools.
  4. Is liquid nail waterproof? There are some products of liquid nail that are indeed waterproof. If you need it to be waterproof make sure to purchase the liquid nail that specifically states it is waterproof.
  5. Can liquid nail be used on tile? Liquid nail can be used on tile and a lot of other surfaces that you would not originally think it could be used for.

Recent Posts